Results 1 to 4 of 4

Thread: VCM update

  1. #1
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    2

    VCM update

    Hey all. Looking for some guidance. I'm attempting to update my VCM suite and its not allowing me due to my net frame work not being up to date as being 4.6.1. I'm currently running a 4.0.1. This is all on a windows 10 operating system. Can someone assist me in the right direction? I did some research but a lot of the updating links are for older systems.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    You can download it straight from microsoft, then update your HP Tuners software.

    https://www.microsoft.com/en-us/down....aspx?id=49981
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    2
    I already gave that a whirl and it didn’t solve the issue. Also uninstalled HP tuners and reinstalled with no luck.

  4. #4
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Thunderdome
    Posts
    389
    when you down load the ms frame, did you run the file?
    I have a burrito in my colon, yet refried beans come out...
    How i know it's from the same meal? I didn't ingest corn any other time.