Results 1 to 3 of 3

Thread: MPVI2 - Interface will not connect to vcm editor but will connect to scanner

  1. #1
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    5

    MPVI2 - Interface will not connect to vcm editor but will connect to scanner

    The other night I was trying to load a tune and it wouldn't connect to editor. Also wouldn't connect to scanner. I resynced both and the scanner is working fine but editor still will not connect to interface. If you try and read vehicle or anything now it just says interface not connecting or something like that.

    I sent in a ticket a few nights ago but haven't heard back from them yet so I figured I'd ask here to see if anyone has any tips or tricks.
    thanks
    02 silverado. 4.8. mpvi2 cammed and stalled etc

  2. #2
    Potential Tuner
    Join Date
    Dec 2019
    Location
    Mason Dixon Line
    Posts
    1
    Did you get this issue resolved? i'm having the same exact issue.

  3. #3
    Tuner in Training
    Join Date
    Jul 2018
    Location
    Fargo, ND
    Posts
    32
    If you have the scanner and editor open, make sure your disconnected in the scanner.