Results 1 to 7 of 7

Thread: C63 Supercharged vcm file

  1. #1
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    5

    C63 Supercharged vcm file

    Hello,
    I'm looking for a vcm file for a Magnusson or Weistec supercharged C63 from 2009 M156.
    Thanks, best regards!

  2. #2
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,120
    You are going to have to make your own

  3. #3
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    5
    I know, it's easyer for me to tune when I can see what for tabels are to edit.

  4. #4
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Columbus, OH
    Posts
    10
    Of course it is easier to copy/modify someone else's work. That's not what real tuners do though. They use their experience and knowledge in an applicable manner to produce a solid product.

  5. #5
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    5
    It's my own car, I do this with HP tuners and in general with HP tuners for the very first time. I am a motorcycle tuner (engine build till to dyno tune) and I can say that motorcycle ecu?s are much easyer to edit and handle as a vcm tune for a car. I don't want to steal any ones work or ideas, I only can't figure out what actual maps are to edit for best results.

    My problem is: The gas mixture leans down in half load before the boost commes, the other things in the tune I have made is perfect and works good.

  6. #6
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,120
    Change lambda full load and then target lambda base for fueling.

    Make sure you are pulling a bunch of timing from the stock file or you are asking for trouble!

  7. #7
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    5
    These two tabels dont help by this problem.
    Anyway I already found out what it actual was.
    Thanks for nothing.