I did a test run, saw the TPS value while recording up above 75% a couple of times, but, when I get back and zoom in, the value is cut off at a max of 50% for the entire run. You can see the table tops in the graph.
What is causing this?
Peter
I did a test run, saw the TPS value while recording up above 75% a couple of times, but, when I get back and zoom in, the value is cut off at a max of 50% for the entire run. You can see the table tops in the graph.
What is causing this?
Peter
Peter Young
1966 LandCruiser FJ40 with 6.0l Gen 3 vortec and 4L80E.
1984 LandCruiser FJ60 with 5.3l Gen 3 vortec, Magnusen supercharger, and 4L60E
You are logging 2 TPS channels, remove the non SAE channel.
Then maybe try it again.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Thanks for the help, had no idea I had two.
Peter Young
1966 LandCruiser FJ40 with 6.0l Gen 3 vortec and 4L80E.
1984 LandCruiser FJ60 with 5.3l Gen 3 vortec, Magnusen supercharger, and 4L60E