Results 1 to 15 of 15

Thread: Camaro LFX Single turbo tune

  1. #1
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24

    Camaro LFX Single turbo tune

    Hi to all, I'm running an custom LFX single turbo setup with MAF only tune,
    The maf only is because I'm from Peru and nobody there tune or know how to tune that kind of engines ... they prefer jdm engines ... and thanks to the help of ed @erm, courses, posts, guides, and after review tunes of similar FI setups (lf4,lf3) I achieve an stable LFX with 8psi...

    But, would like to know if someone there could share an LFX FI tune... to review that and try to improve my knowledge.

    Im going to share my tune If someone would like to review and give me some feedback...
    V6-TURBO-MS01-DTC01.hpt
    Last edited by jquequezana; 11-07-2018 at 11:43 PM.

  2. #2
    hey man have you made any progress on this im in the process of tuning my Twin Turbo not sure if you have updated your tune since

  3. #3
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24
    Quote Originally Posted by tlavoie87 View Post
    hey man have you made any progress on this im in the process of tuning my Twin Turbo not sure if you have updated your tune since
    V6-TURBO-MS01-DTC01-SPK2-PE7-TM2-VE1-MS3-LAUNCH-CONTROL-MIN-SPARK.hpt

    My TPS don't open 100% and see some KR

    PASS 3.hpl

  4. #4
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24
    How much boost and which AFR are u ?

  5. #5
    14-15 psi .. .83 Lambda also spraying meth i got a set ove mace cams with an overdrive Fuel lobe on the Way now

  6. #6
    Tuner ZeroBoostBuick's Avatar
    Join Date
    Aug 2008
    Location
    S.W. Ontario Canada
    Posts
    173
    Quote Originally Posted by jquequezana View Post
    Your throttle does open 100%. It's just HPT needs some calibration to read it properly.
    https://forum.hptuners.com/showthrea...2069#post32069

  7. #7
    jquequezana how is your idle.. i cant seem to get rid of negative timing i have tried just about everything

  8. #8
    Tuner in Training
    Join Date
    Nov 2016
    Posts
    12
    tlavoie. Look for small vac leaks.

  9. #9
    Quote Originally Posted by 2jzgte View Post
    tlavoie. Look for small vac leaks.
    will try i did some Maf and VVE tuning and got it to idle around 0-4 degrees which is decent was better than the -5--10 degrees

  10. #10
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24
    Quote Originally Posted by tlavoie87 View Post
    14-15 psi .. .83 Lambda also spraying meth i got a set ove mace cams with an overdrive Fuel lobe on the Way now
    Share u tune bro would like see how your timing table is set

  11. #11
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24
    Are u fix the barometric correction ? doing a baro breakout ?

  12. #12
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    1
    Hey jquequezana what kina map sensor are you using?? I have a 2015 3.6l camaro with single turbo set up and the stock map sensor only gose to 17.4 psi max

  13. #13
    im using a 3bar but run maf only

  14. #14
    Quote Originally Posted by jquequezana View Post
    Share u tune bro would like see how your timing table is set
    send me a PM

  15. #15
    Tuner in Training
    Join Date
    Aug 2016
    Posts
    24
    ZR1 3bar map sensor