Results 1 to 7 of 7

Thread: Some talk about the expander hub on a private forum, is it available yet ???

  1. #1
    Tuner in Training
    Join Date
    Oct 2014
    Posts
    39

    Some talk about the expander hub on a private forum, is it available yet ???

    Referring to the expander hub for the mpvi2 so we can datalog WbO2 directly to out unit again !!!

  2. #2
    Advanced Tuner
    Join Date
    May 2016
    Location
    Adelaide, Australia
    Posts
    246
    It's been mentioned on here a few weeks. They have two options finally

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,482
    Its almost ready to go https://forum.hptuners.com/showthrea...ure-Set-Update

    Pro link cable will be free to all pro users and will likely tide most people over.
    You can open a support ticket here https://support.hptuners.com/

  4. #4
    Tuner in Training Viper's Avatar
    Join Date
    Nov 2004
    Location
    Posts
    19
    Bill,

    I know the plan to release the expander hub was targeted for Q1 but still doesn't appear on website.

    Any update on when it will become available?

    I already have the prolink and need more inputs.

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,482
    We will announce it on our forum and social media channels once it has been released.
    You can open a support ticket here https://support.hptuners.com/

  6. #6
    Tuner in Training
    Join Date
    May 2020
    Posts
    11
    I am using prolinks two available inputs, but would like to add some additional analog sensors to the canbus? Probably, about 3 to 4 additional 0V to 5V sensors. Is there anything available to do this? Seems like the expander hub would, but I don't think it's available and may never be. Anyone using something different to get additional analog sensors on the canbus. Are people using Arduino for this? Can you daisy chain the prolink? Thanks in advance.

  7. #7
    Tuner in Training
    Join Date
    May 2020
    Posts
    11
    Expander hub available yet? Anyway to add more than two sensors yet? I already have two sensors with prolink. Expander hub was going to be released in 2019. Anywork around for this?