Working with a 2004 GTO. LS1 with a MP112 Magnacharger kit.
I am trying to change my tune file to use a 2-bar MAP sensor. I followed the directions to apply the different OS. It did change the MAP Sensor Linear parameter from 94.43 kPa to 200 kPa. However, the VE table has not been changed as it describes in the instructions. It only reads to 105 kPa.
I tried the same change on a 2000 Camaro stock tune, and the different OS is ported over. Both the MAP sensor limits and the VE table changed as they are supposed to. The data in the VE table shows all "5.19" as expected.
Why won't the 2004 GTO file change the OS?