Results 1 to 6 of 6

Thread: 2016 Hellcat charger boost limits ?

  1. 11-13-2018 #1
    spoolin342
    spoolin342 is offline
    Tuner in Training
    Join Date
    Jan 2015
    Posts
    47

    2016 Hellcat charger boost limits ?

    car has upper and lower pulley setup should make about 17-18 psi the bybass valve opens and dumps it down to 7-8psi I got all the air flow limits set hi already the only thing I did noticed was the slowpath torque value jumps from 2 to 7 when it does it. does anyone have a list as to what these values are for?
    Reply With Quote Reply With Quote
  2. 11-13-2018 #2
    1bh
    1bh is offline
    Tuner in Training
    Join Date
    Dec 2016
    Posts
    41
    What fuel? Injectors ?
    Reply With Quote Reply With Quote
  3. 11-13-2018 #3
    spoolin342
    spoolin342 is offline
    Tuner in Training
    Join Date
    Jan 2015
    Posts
    47
    id 1000s and mix 50/50 c16/pump
    Last edited by spoolin342; 11-13-2018 at 06:05 PM.
    Reply With Quote Reply With Quote
  4. 11-14-2018 #4
    gotparts
    gotparts is offline
    Tuner in Training
    Join Date
    Sep 2010
    Posts
    17
    There is numerous tables you would have to adjust other then airflow tables. Torque management tables need to be adjusted also.
    Reply With Quote Reply With Quote
  5. 11-14-2018 #5
    Jay@HAP
    Jay@HAP is offline
    Advanced Tuner
    Join Date
    Jul 2015
    Posts
    925
    I've done 21-23 with a stock blower before....don't do it...I don't recommend it.
    Reply With Quote Reply With Quote
  6. 11-24-2018 #6
    32vape
    32vape is offline
    Tuner
    Join Date
    Jun 2016
    Posts
    152
    Check the cat temp tables. I had one at 17psi going into cat protect and dumping boost.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »