Results 1 to 3 of 3

Thread: 2004 ba falcon 4.0

  1. #1
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    6

    2004 ba falcon 4.0

    Ok so i have a issue! I connect the hp tuner to the OBD and try to read the files and when I do this after pushing read the fields stay blank but says read is done and then thats it. So i go to hardware (where it is blank) and try find ford 4.0 but it has a heap of other green oak ford etc etc. I mite add also it won't even pick up the vehicles vin number.
    Any body know wat is going wrong? Also I can read the scanner on the same vehicle just not read the computer files.

  2. #2
    Advanced Tuner
    Join Date
    Dec 2009
    Location
    Bayside, Melbourne, Victoria
    Posts
    301
    Guessing it's been tuned with SCT, if you manually select black oak 1472K it should read the file & then post it here or PM & should be able to give you the correct info for it!

  3. #3
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    6
    The car use to be mine had it from near new i gave it to my sister and it hasn't been tuned ever before which is why I'm unsure wat is going on haha will do mate thanx for your help .