Results 1 to 3 of 3

Thread: Can I scan a duramax?

  1. #1
    Tuner in Training
    Join Date
    Apr 2016
    Posts
    34

    Can I scan a duramax?

    So I plugged into a work van we have 2006 duramax and the scan does not show 80% of info
    Shows TPS at 100% my buddy says maybe my scanner will not do Duramax?
    The reason I scanned it was because it was sounding like it was going to throw a rod?
    I deleted a couple codes: P003A turbocharger boost control A position exceeded learning limit
    and P0191 feul rail pressure sensor A circuit range/performance

    I deleted these and knock is gone?blue1.hpl

  2. #2
    Potential Tuner
    Join Date
    Nov 2018
    Location
    Alberta, Canada
    Posts
    1
    bump

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Start by repolling for the available pids, if that doesn't do the trick please open support ticket
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"