Results 1 to 3 of 3

Thread: Coyote Control pack - wot afr commanded not matching wot afr table

  1. #1
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    6

    Coyote Control pack - wot afr commanded not matching wot afr table

    Tuning a supercharged Coyote for the first time, i?m following the Lasota cookbook advice to make my base tune... everything seems to work great, now trying wot tunning, but after three dyno pulls , and logs, have found that the afr commanded is not following what i made as a table...
    attached is a mini log, and the tune file.
    anyone sees whats wrong?? any suggestions??
    thanks in advance
    Juan
    coyotealluminatorcastiwhitevoy en la pagina 39maswotenrichment.hpt
    sobre el dyno no hace wot.hpl

  2. #2
    Tuner in Training
    Join Date
    May 2018
    Posts
    19
    Hey mate in the electronic throttle section you had the wot start and end well away from where it should be
    I adjusted the AFRs to be 13.6 and at wot 11.8
    there some minor changes to the tune your might need to compare to see

    in your log theres a fuel fault have you got any DTCs
    check that too.
    see if this helps

    coyotealluminatorcastiwhitevoy en la pagina 39maswotenrichment.hpt

  3. #3
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    6
    thanks a lot Jase , i?m gonna test it tomorrow and report back!!