Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: 95mm LT5 Throttle body max area?

  1. #21
    Advanced Tuner
    Join Date
    Dec 2015
    Location
    Miami,Fl.
    Posts
    290
    Quote Originally Posted by Camaro6 View Post
    I have the LT5 throttle body on my 2018 SS with LT4 s/c and fueling. I have stock dd, stock virt tq, stock timing values at idle, and it lays down power no problem. The 95mm did put down a little over 30whp more power than the stock 87mm - so it is a good replacement choice. max area 5,054
    Is your blower ported? If not, stock with just the adapter plate?
    2023 Ford Maverick 2.0T AWD

  2. #22
    Tuner Camaro6's Avatar
    Join Date
    Jun 2018
    Location
    Chicagoland
    Posts
    125
    Quote Originally Posted by HeavyChevy305 View Post
    Is your blower ported? If not, stock with just the adapter plate?
    Not ported and no adapter plate. I did however open the snout to allow the larger throttle body to open without hitting and slotted the holes on the 95mm throttle body. Bolts right on without any issues.
    2018 Camaro SS, LT4 Fuel System, LT4 S/C
    2020 Ford Edge ST
    1999 Pontiac Firehawk
    1987 Chevy Caprice, 6.0L TT 4L80 AWD
    ***Only AWD box chevy in the world***
    Next Level Tuning and Performance
    Tuning email: [email protected]

  3. #23
    Tuner
    Join Date
    May 2017
    Location
    North Florida
    Posts
    80
    Is there that much of a difference if you put in 5500 instead of 5054? What will that extra area effect in the tune? It is not ported just a stock 95mm. with the adapter plate.

  4. #24
    Senior Tuner Higgs Boson's Avatar
    Join Date
    Mar 2010
    Location
    Texas Hill Country
    Posts
    3,299
    my tb scalar is stock with a 103 and whipple setup.

    don't waste your time.