Results 1 to 5 of 5

Thread: Cobra jet manifold tuning

  1. #1
    Potential Tuner
    Join Date
    Apr 2016
    Posts
    4

    Cobra jet manifold tuning

    Any of you have experience tuning a cobra jet and monoblade on a gen 1 car?

  2. #2
    Advanced Tuner
    Join Date
    Sep 2010
    Posts
    872
    Yes, tons of posts regarding CJ tuning with a mono, they work great as long as you'd didn't get sticked with a defective one, I've had a 50/50 good/bad rate with them. Acufab is also anoying to deal with when it comes to fixing their bad ones

  3. #3
    Advanced Tuner
    Join Date
    Feb 2017
    Location
    TX
    Posts
    761
    Same here, good manifold, great results. You'd figure one of the best and most expensive manifolds would look a little more professionally assembled. Looks cheap, put into a plastic mold and pieced together before it dried. The cracks/seams inside the manifold are horrendous. However, I've had no problems. C-F-M twin 67 on mine, done mono blades and GT500 TB's

  4. #4
    Tuner JnJSpdShop's Avatar
    Join Date
    Aug 2005
    Location
    Western New York
    Posts
    195
    Quote Originally Posted by sicmadek View Post
    Any of you have experience tuning a cobra jet and monoblade on a gen 1 car?
    Street car or race car? If it is a street car the monoblade is a horrible idea on a NA combo

    Western New York's Performance Headquarters

    716.830.0506




  5. #5
    Tuner in Training
    Join Date
    Oct 2016
    Location
    Qatar
    Posts
    19
    Quote Originally Posted by JnJSpdShop View Post
    Street car or race car? If it is a street car the monoblade is a horrible idea on a NA combo
    +1
    Ahmad Aboelomarein

    Ford Certified Tuner