Using version 4.0.12 As the title states when trying to read an EEC-V in a 2000 mustang GT. It instantly pops up unable to detect vin, If I can make it past that and choose EEC-V and read entire I then get an unsupported interface note. will the EEC-V only have support with the beta version at the moment. or is the support for all 99-04 mustangs still in the works. Iv'e seen a few older threads stating we should have support. but havn't dug very deep on the subject yet.
Last edited by Oleblu; 11-29-2018 at 10:44 AM.
97 ext cab short bed silverado 5.7 411 swap, edelbrock 29135 intake, lightly ported 906 heads milled .035 thou. factory press in rocker studs & rockers, comp 787 retainers & stock locks, ls6 springs. Comp cams 08-503-8 T56 swap
86 SWB crate vortec 5.7/th350 The wife's truck
using an MPVI1 or MPVI2?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Mpvi 1 as the title states lol, thanks for the quick response.
97 ext cab short bed silverado 5.7 411 swap, edelbrock 29135 intake, lightly ported 906 heads milled .035 thou. factory press in rocker studs & rockers, comp 787 retainers & stock locks, ls6 springs. Comp cams 08-503-8 T56 swap
86 SWB crate vortec 5.7/th350 The wife's truck
EEC-V supported vehicles require MPVI2. You will not be able to read or write them with the MPVI1Originally Posted by Oleblu
Seems there's an upgrade in my very near future. Again thanks for the quick response and great customer support.
97 ext cab short bed silverado 5.7 411 swap, edelbrock 29135 intake, lightly ported 906 heads milled .035 thou. factory press in rocker studs & rockers, comp 787 retainers & stock locks, ls6 springs. Comp cams 08-503-8 T56 swap
86 SWB crate vortec 5.7/th350 The wife's truck
Reply With Quote