i have not tried to read a 7.3 pcm with the "chip" plugged in, but i would recommend against it, why not just adjust the tunes from the hydra? and skip Hp, since they dont support the Switch on fly like a ts 6pos or hydra
i have not tried to read a 7.3 pcm with the "chip" plugged in, but i would recommend against it, why not just adjust the tunes from the hydra? and skip Hp, since they dont support the Switch on fly like a ts 6pos or hydra
Is it possible to adjust the hydra tunes with hp?
no, you need to use winols or minatour
silver64- what box code are you working with?
Has anyone tried the scanner on these lately to see if they added any PIDs? I have someone that wants one tuned, but if nothing has been added maybe i'll see what Forscan can log.
any update on this vehicle? I have a 2000 f350 7.3 and mpvi2. every time I try to connect with the vehicle running to scan and log pids it kills the truck.....not to sure what to think. I'm not going to license the truck if I can't log and scan codes...
Is the truck an early 99?
any one got links that work for the scanner and editor trying to look at my 7.3 excursion or a link for the pids if kadams87 uploaded some
I'm getting the "definitions failed to load" error when "attempting to contact HP Tuner servos" error when reading my 2003 7.3. My response from HP Tuner support was:
Thank you for contacting support
I have forwarded the file to our engineer for review, unfortunately I'm not able to offer any eta or any promises for this application.
I'm trying to build a bench setup for a 2001 7.3. I have the Data Link Connector wired to the PCM, and all power and grounds connected.
When I attempt to read or scan, I get "unable to setect vehicle diagnostic protocol"
I'm using the latest Beta on an MPVI2.
Anyone else have a functioning bench setup?
Last edited by truxellm; 03-28-2020 at 10:32 PM.
Does anyone have any experience tuning for single shot injectors?
why even release so called "support" for stuff if it hasnt even been proven to work at all. all this does is make it a huge waste of time for whoever attempts it and a complete waste of money for nothing
Following
1999 chevy suburban 7.4l on 40's
2006 chevy 2500hd duramax
2004 chevy trailblazer wife's wheeler
1999 ford f250 7.3l super duty
2008 ford f350 6.4l super duty
1994 chevy s10 4.3 vortech heads w/ tbi intake stock plan to bag one day
2010 bmw 535xi wife's DD