Originally Posted by
Toad0407
Hi fl0w3n,
Congrats on your first Ford Diesel, to get your stock file, you would need to read the vehicle. You can do this by downloading the HPT VCM Suite, I recommend downloading the BETA version since there are more parameters. You would go to the editor and go to "read vehicle" and pull the stock file. Once you have the stock file, you can go ahead and make your tweaks. Once you are done with your edits/changes, you should save your file and go to "write vehicle". Make sure that you have purchased credits for the module you are wanting to upload the file to, this is called licensing. For a 2015, you would only need 2 credits. There's a process on how to purchase credits, and etc on the HPT website. To my knowledge, BIN files are used with other tuning platforms such as Ezlynk. The base files from Ford come as VBF files which are converted to BIN. If you're only going to use HPT, then no need to worry about BIN files.
Have fun tuning your 2015. There's a lot of potential with these trucks just off the bat when it comes to just tuning alone, even with the DPF intact.