Results 1 to 6 of 6

Thread: Comp cam 273H-14 tune

  1. #1

    Comp cam 273H-14 tune

    Hi all does anyone have a 273H-14 or 274 comp cam tune I can have a look at

    I'm have a nice tune with my stock cam and blower

    I'm in the middle of upgrading the cam
    Just looking to be able to start the car and run the cam in instead of it stalling

  2. #2
    Potential Tuner
    Join Date
    Dec 2018
    Location
    Lake Havasu City, AZ
    Posts
    2
    I would be interested in this as well, I am installing the same cam over the holidays, 7875 turbo too.

  3. #3
    Following...

  4. #4
    anyone got any ideas or a copy of a tune they can share

  5. #5
    Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    148
    2013 Chrysler 300S, 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force with 2.75 pulley, fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, Magnaflow Cat-back, FTI 2800 stall, Trans built by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. LG aluminum rad. Dual SRT fans. 4 piston Brembo upgrade. Mopar Stage one springs.

  6. #6
    thanks mate ill have a look and see