Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Thread: VCM Suite v4.2 Now Available!

  1. #1
    HPT Employee Darek@HPTuners's Avatar
    Join Date
    May 2018
    Location
    Chicago, IL
    Posts
    125

    VCM Suite v4.2 Now Available!



    VCM Suite v4.2 Now Available

    HP Tuners presents VCM Suite v4.2 which is now available for download via our website here.
    Our latest update of VCM Suite includes newly supported vehicles (internet connection required),
    updated definition support with more parameters available, additional controller functions and a
    wider range of scanning abilities and functionality.

    We continue to work on expanding our support across all of the platforms that we offer, and try
    to add as many different models as we can. It is also important to keep in mind that some of
    the new support that we offer does require an internet connections when writing to the vehicle.
    For more information, and to view the latest supported vehicles list, click here.

    Please note, VCM Suite 4.2 is fully compatible with the MPVI2 and the previous generation MPVI Pro
    and Std interfaces, however new vehicles platforms are only supported on the MPVI2

    Thank You from the entire HP Tuners Team for all your ongoing support, and please ensure you
    follow us on our social media channels for all the latest updates!




    VCM Suite v4.2 Updates

    General
    • Toyota Support (2007+ Tundra/Sequoia 5.7L)
    • Hyundai Support (2012-2018 Veloster Turbo)
    • Improved Definition Support for most supported paltforms
    • Improved PID/DMR Lists for most supported platforms
    • Support for MPVI2 Pro Link in VCM Scanner


    FCA (Dodge)
    • ZF8HP, ZF8HP2, ZF9HP DTC Lists


    Ford
    • Ford 10R80 Transbrake
    • Ford Turbo Coefficient Calculator



    Audi/Volkswagen
    • ZF8HP Auto-Upshift Enable/Disable bi-drectional control in VCM Scanner
    • Improved support for ZF8HP TCM


    Mercedes
    • More and improved definitions created for supported vehicles


    JLR
    • More and improved definitions created for supported vehicles



    For the full VCM Editor Change Log, please see the following link:
    http://www.hptuners.com/help/VCM-Edi...changelog.html

    For the full VCM Scanner Change Log, please see the following link:
    https://www.hptuners.com/help/VCM-Sc...changelog.html




    Ford
    • 2011-2014 Ford Ranger 2.2L/3.2L (ECM & TCM)
    • 2019 Ford Mustang GT/Bullitt 5.0L (PCM)
    • 2018 Ford F-150 3.0L Diesel (ECM & TCM)
    • 2012-2019 Ford Fiesta ST (non-USDM)
    • 2018 Ford Mustang/Ford F-150 5.0L Aftermarket Supercharger PCM Support
    • 2019 Ford F-Series 6.7L Powerstroke (ECM & TCM)


    FCA (Dodge)
    • 2019 Dodge Challenger SRT Hellcat/REDEYE 6.2L (ECM & TCM)
    • ZF9 9-Speed Transmission


    GM
    • 2017-2019 Chevrolet Silverado 6.6L Duramax (L5P)
    • 2017-2019 GMC Sierra 6.6L Duramax (L5P)
    • 2019 Chevrolet Colorado 3.6L
    • 2019 Cadillac Escalade 6.2L


    Toyota
    • 2007+ Toyota Tundra 5.7L
    • 2007+ Toyota Sequoia 5.7L


    Hyundai
    • 2012-2018 Hyundai Veloster Turbo (MED17.9.8)



    For more information, and to view the latest supported vehicles list, click here.



  2. #2
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    Stand alone data logging bug fixed?

  3. #3
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    Quote Originally Posted by orange ss View Post
    Stand alone data logging bug fixed?
    Can you describe the bug you're experiencing? Do you have a ticket # we can look up?
    We got this guy Not Sure, ...

  4. #4
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    Quote Originally Posted by Keith@HPTuners View Post
    Can you describe the bug you're experiencing? Do you have a ticket # we can look up?
    no ticket, some parameters not recording during stand alone data logging....problem is well known, recommended fix was to use the Beta version until the problem got resolved.

  5. #5
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    If the problem was resolved in the 4.1 beta, then it should also be resolved in 4.2
    We got this guy Not Sure, ...

  6. #6
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38
    lasts beta version 4.1724 ! should install stable !?

  7. #7
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    6
    I just downloaded this and went to the help that directed me to the website help. Where are all of the dodge parameters in the online help area at: http://www.hptuners.com/help/ . I would like to know what the parameters are to help me understand? Thanks, Scott

  8. #8
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by chal08 View Post
    I just downloaded this and went to the help that directed me to the website help. Where are all of the dodge parameters in the online help area at: http://www.hptuners.com/help/ . I would like to know what the parameters are to help me understand? Thanks, Scott
    Scroll over any table for its description.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  9. #9
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    6
    Thanks Bill@HPTuners!

  10. #10
    Tuner in Training
    Join Date
    Aug 2015
    Posts
    23
    Upgraded to 4.2 now i can not connect and read any info in scanner or editor. Getting invalid application key in in editor and unable to detect diagnostic protocol in scanner is there something i missed

  11. #11
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    36.1094, 115.1781
    Posts
    432
    Quote Originally Posted by 2damslo View Post
    Upgraded to 4.2 now i can not connect and read any info in scanner or editor. Getting invalid application key in in editor and unable to detect diagnostic protocol in scanner is there something i missed
    Please open a support ticket at https://support.hptuners.com/

    Make sure to include a VCM Suite Infolog and Debug.dat

  12. #12
    Tuner in Training
    Join Date
    Oct 2007
    Posts
    46
    Bill, im having the exact same issue, i was trying to tune and 18 mustang and was unable to tune it with 4.012 so i had to download thr latest vcm and no im stuck with a device that wont let me tune anything at all!!! I sent a email to support already ticket #156439, could you look into for me please

  13. #13

  14. #14
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by bartender_77 View Post
    Bill, im having the exact same issue, i was trying to tune and 18 mustang and was unable to tune it with 4.012 so i had to download thr latest vcm and no im stuck with a device that wont let me tune anything at all!!! I sent a email to support already ticket #156439, could you look into for me please
    Looks like we have already responded and are awaiting a bit more information from you so we can further troubleshoot the issue.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  15. #15
    Advanced Tuner
    Join Date
    Oct 2009
    Posts
    321
    Does anyone have a download file for 4.1? Ever since downloading 4.2 neither of my MPVI Pro's will connect anymore. I've been dealing with support, my ticket number is 156380

  16. #16
    OP lists Tundra/Sequoia support for 2007+, but the supported vehicle list shows '07-16. Are '17+ vehicles supported?

  17. #17
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by SlowNStock View Post
    OP lists Tundra/Sequoia support for 2007+, but the supported vehicle list shows '07-16. Are '17+ vehicles supported?
    Not currently.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  18. #18
    Gotcha, thanks!

  19. #19
    Tuner in Training Viper's Avatar
    Join Date
    Nov 2004
    Location
    Posts
    19
    I am using the 4.2.1 and noticed two potential issues:

    1.) VCM Editor Issue: 3D graphs cannot be rotated as in past releases
    2.) VCM Scanner Issue: Logs need to be saved, closed, and then reopened to view all data on graphs

    Just a heads up gentlemen … maybe its a bug … maybe it is by design.

    Only the Admins really know.

  20. #20
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Humble suggestion: please consider putting the version number in the file names (ex: VCM Suite 4.2.12.0.msi). Having to download the file and begin the install just to figure out if it's newer than the currently installed version is a pain!