Results 1 to 11 of 11

Thread: ✔️✔️✔️✔️ 2014 infiniti q50 vq37 crack pop & more ✔️✔️✔️✔️

  1. #1
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    4

    Cool ✔️✔️✔️✔️ 2014 infiniti q50 vq37 crack pop & more ✔️✔️✔️✔️

    Im new to this, I own a Q50 2014 3.7 and I would love to learn more.
    FIRST GOAL: Loud Crack & pops while downshifting etc
    I heard its pretty simple once you know which parameters to edit, but theres not much information about VQ engines with HP tuner.
    Any input is welcome or useful links/videos

    Also if you can simply show me how to quickly do this using TEAMVIEWER I can pay you I dont mind.

  2. #2
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163
    Try what I messaged you, if you can't figure it out then I can remote login and adjust it for you. Its pretty simple tho!

  3. #3
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    4
    That's awesome thank you, wasn't expecting such a quick reply

  4. #4
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    2
    Would you please guide me how can I get pops from a y62

  5. #5
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163
    I don't know specifically which tables for that particular vehicle, but the idea is to turn fuel on during decel and then set the timing to a negative amount in your lowest load columns from like 2k-5k area. -5* to -15* area works well.

  6. #6
    Potential Tuner
    Join Date
    Jan 2019
    Posts
    3
    Hi. Touching on this subject, I did manage to get my timing retarded in the low load, but I don?t see an option for over run or deceleration fuel.

  7. #7
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    1
    Quote Originally Posted by BackyardTurbo_FTW View Post
    Try what I messaged you, if you can't figure it out then I can remote login and adjust it for you. Its pretty simple tho!
    Do you mind sending me the same file

  8. #8
    Quote Originally Posted by BackyardTurbo_FTW View Post
    Try what I messaged you, if you can't figure it out then I can remote login and adjust it for you. Its pretty simple tho!
    Please send it to me as well!

  9. #9
    Quote Originally Posted by BackyardTurbo_FTW View Post
    Try what I messaged you, if you can't figure it out then I can remote login and adjust it for you. Its pretty simple tho!
    could you please send it to me

  10. #10
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    11
    there is no decel fuel cut off or decel timing. What are you guys doing for pops/burble on these cars?

  11. #11
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163
    Quote Originally Posted by BackyardTurbo_FTW View Post
    I don't know specifically which tables for that particular vehicle, but the idea is to turn fuel on during decel and then set the timing to a negative amount in your lowest load columns from like 2k-5k area. -5* to -15* area works well.

    People keep PM'ing me about this, please re-read this. Ive looked at a Nissan file 1 time, I don't tune them. I just stated what you need to do in general to make the car pop/bang on decel.