I have a 418 with 40lb Accel LS1 style injectors. I can't get the correct injector data from Accel. I have been trying for two weeks. Holley is supposedly talking to product engineers but I am at the point of just buying another set. What is a good injector for the 550 fly wheel range? I need LS1 style injectors to fit rails and intake. Any help would be greatly appreciated.
I have the Bosch 36lb GTP injectors. They flow 40.5 on a ls engine. Should be around 80-85% at 550hp. All the information is posted about them on this forum.
They don?t have published data... but I can tune those Injevtors
The 42lb green tops (48psi at 4bar) time really well and that data is published..
550hp on 93 octane on a NA setup is doable with them
What brand? FoMoCo Bosch ? I looked into some green tops but couldn't decide which was best choice.
Ford brand...
Bosch
Hey @BenCharles do you have the injector data for the 42lb green tops? on an .XLS spreadsheet that i can use? I have a lq4 with holley hiRam and 80# Dekas, want to go down to a smaller injector for N/A ( 150-200 shot n20 in the future) THanksOriginally Posted by Ben Charles
M-9593-f302?
1997 30th SS. Torqhead 24x, TFS heads, 223/235 cam, 4l80e, S60 D1SC 14psi
Reply With Quote