Hi, I haven't used this system in a while. I had to get a new laptop. Trying to scan my truck, just to make sure it still works. Everything comes up, but it says its off line. How do I get it back running? I updated to the knew version, I think. Do I have to buy a key?12/7/2018 11:14:33 AM
VCM Suite Product: VCM Editor 4.0.12
Operating System: Windows 10 (build 17134)
Microsoft .NET: 4.0.30319.42000, 4.7.1 or later
CPU: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G
Available Memory: 1,828 MB
Protocol Info: ISO 15765-2, CAN, 500 kb/s
ECM: 7E8, CAN - E38, GM Gen4 V8
VIN: 2GTEC13C471717766 - 2007 GMC Sierra 1500, 4.8 L, 8 Cyl
Serial: 86YPLAK17152RC09
Programmed State: Fully Programmed
OS: 12614088
Calibration IDs: 12614088, 12614226, 12614219, 12614272, 12616078, 12616013, 12605899, 12590068
Calibration VNs: 00000F82, 000065A7, 0000BB8B, 00008D38, 00009A20, 0000558D, 0000C846, 0000FE72
Basic PIDs: 44
Trouble Codes:
P0121 - Throttle/Pedal Position Sensor A Circuit Range/Performance (Current)
Controller Type ID By OS: 5010
Diagnostic Requirements: None
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, SAE J2190 Mode 0x22, HPT Mode 0x23, GM Mode 0x2C 0x2D 0xAA, CAN Listener
None: 7EA, CAN - T42, GM A4
Serial: BKYNNHK071521034
OS: 24239036
Calibration IDs: 24239036, 24237446, 24240459, 24237444
Calibration VNs: 0000F454, 0000107F, 0000B478, 0000317E
Basic PIDs: 7
Trouble Codes:
Controller Type ID By OS: 50
Diagnostic Requirements: None
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, SAE J2190 Mode 0x22, HPT Mode 0x23, GM Mode 0x2C 0x2D 0xAA, CAN Listener
None: 7EB, CAN
Calibration IDs: 15805650, 15805654, 15805660
Calibration VNs: 0000FEEC, 00009FFA, 00002D5A
Basic PIDs: 8
Trouble Codes:
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, CAN Listener