Results 1 to 3 of 3

Thread: Unit Conversion window issue

  1. 12-08-2018 #1
    Dewayne Smith
    Dewayne Smith is offline
    Tuner
    Join Date
    Feb 2016
    Posts
    51

    Unit Conversion window issue

    Hello all!
    When I open the Unit Conversion window it doesn't show everything like maybe the window needs to cascade or something but I can't seem to make this happen.
    I have the latest version of HPT but this is a freshly built laptop running Win7 Pro 64 bit OS. My old laptop has version 2, 3 and 4 on it and this window opens just fine.
    I'm not saying this is a HPT software issue but I havn't noticed this anywhere else so I'm just wondering if anyone else has experienced and what you may have found to be the problem.
    Thanks,
    Dewayne

    HPT unit converter issue.png
    Reply With Quote Reply With Quote
  2. 12-08-2018 #2
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,261
    check your DPI settings, should be set to 100%, looks like it might be set to 125% or something.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  3. 12-08-2018 #3
    Dewayne Smith
    Dewayne Smith is offline
    Tuner
    Join Date
    Feb 2016
    Posts
    51
    That was it. Can't believe I haven't noticed an issue with anything else because of that setting. I changed it so I could read the screen better so I guess I will just have to get some glasses now.

    Thanks Bill.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »