-
Tuner in Training
Gen 4 Rev Limiter Tuning
Okay, lets start off by saying; Ive been through literally every thread pertaining to gen 4 limiter tuning.
So, what Im trying to achieve is basically a rev limiter that hits exactly like ls1 fuel cut with a really low rpm delta.
The table that pertains to this is COMMANDED TORQUE DELTA in Fuel/Cutoff.
I just cant seem to get the settings to hit the way I want.
Here's a link to exactly what im shooting for;
https://www.youtube.com/watch?v=pHF3Z7Gk_f8&t=42s
Does anyone know the answers I'm looking for?
Thanks
-Sean
-
Tuner in Training
-
Senior Tuner
dont think id be using fuel cut if ur going to sit on the limiter, just adjust the torque delta above and below so it removes enough and then adds also can take a while to get right, and the commanded torque table below it also can make that higher so it dosnt remove as much to suit what u want to do, i havnt done much with it myself only a little but its just alot of stuffing around to see what it likes to get what ur after