Results 1 to 3 of 3

Thread: Question about disabling AFM/DOD

  1. #1
    Tuner in Training
    Join Date
    Dec 2018
    Location
    South Florida
    Posts
    31

    Question about disabling AFM/DOD

    Hi all,

    I apologize if this is the wrong place to ask this newbie question.

    After disabling DOD do I have to set the "Disable RPM" value to "0" also?


    Again, sorry if this is not the place to ask this beginner question.


    Thank you for any feedback.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    No, you can just use the master enable/disable feature and it will take care of everything.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Dec 2018
    Location
    South Florida
    Posts
    31
    Thank you sir. The reason I ask is I read the handheld file that was on my truck and I saw that DOD was disabled, but the Disable RPM was also set to zero.

    Time to get rid of the handheld.

    Thanks again 5FDP!