M Select gone after tune F150 2013 5.0

[SultanHassanMasTuning]

team,

did a remote tune using the mpvi2 and customer noticed that M select is not highlighting in dash and cannot select any gears.

everything else is perfect in Drive (D)


anyone run into this...



regards

[MaximumVelocity]

Re-enable VID block

[WS6HUMMER]

Re-enable VID block

X2 yes been there, had that happen lol.

[SultanHassanMasTuning]

i recall we need to disable VID for gear change. yes i did that for 4,56 gears and 34.4 inch tire

[WS6HUMMER]

i recall we need to disable VID for gear change. yes i did that for 4,56 gears and 34.4 inch tire

Not all year models need the VID block disabled to change the gear or tire size. In my case it was a 2011 that I was working on, re-enable the VID block and change the tire size, & final drive switches from "learn from BCM" to "Calibration".

[Cyle_greenhill]

vid block enable will fix it.

[SultanHassanMasTuning]

yes, so anyone that may run into this

VID keep untouch, and you have two sections for tire and axle adjust, make your adjustments and switch to calibrate from learn from BCM and you should be golden!