Results 1 to 2 of 2

Thread: DTC and paste feature

  1. #1
    Advanced Tuner
    Join Date
    Apr 2013
    Posts
    210

    DTC and paste feature

    Can you guys bring back the ability to paste values into a table without opening it? I know you currently can copy, but not blind paste. Been waiting for this for a long time. Also is there the ability to bring back the 0,1,2,3 hotkey when setting DTCs to no error, no mil, second error etc etc? I used to tab and 3 most of the b2s2 and evap codes now it takes quite a while.

    These things save me ALOT of time as a tuner. Please consider changing this back.

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    click on it and select a number, the functionality is there, at least in 4.2/4.3. Not sure about older versions but in the newest software the functionality is there.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"