Originally Posted by
pigoman92
Welcome! Glad to see someone else trying to tune the 1.0 EcoBoost!
So far it looks like you haven't changed anything too aggressively. I haven't messed with anything related to timing yet, since I have no definite way to measure whether what I'm doing is right or not. To be safe, it looks like you could add more fuel by increasing the Max Injector Angle and the Max Duty Cycle under Engine > Fuel > General. You can also increase the fuel pressure under Fuel System > Fuel Pressure > High Pressure Desired. I'm by no means an expert, but I was able to get rid of any low fuel warnings I got that way.
Are you hitting any limits still when you record a pull? Most of my "tuning" is just butting up against different limits and seeing what I need to adjust to get the engine to stop pulling power.