Results 1 to 2 of 2

Thread: "blinking" turbo fmem mustang

  1. #1
    Advanced Tuner
    Join Date
    Sep 2016
    Posts
    389

    "blinking" turbo fmem mustang

    This is a stock turbo, full boltons automatic mustang im trying to see if i can get it into the 12.3's (current best is 12.4@107mph) i cant get it over 330whp so im trying to find something in my tune that will give me that edge i noticed that during the last dyno session that after 5400 rpm turbo FMEM would start blinking in my air limit source and my driver demand limit source, i tried modifying the turbo temp and airflow limit tables but that didn't help, what else could i be missing?

    dynoafterroll4.hpl
    newwg3-1roll2.hpt

  2. #2
    Tuner
    Join Date
    Feb 2018
    Location
    Kuwait
    Posts
    98
    Try to raise the limits of the LSPI reduction in Torque Management> General > LSPI Reduction > FMEM