as the title states, I get a random stabilitrac light at idle and very low rpms after the cam and longtube install. I have the misfire test turned off. there is no check engine light. has anyone run into this?
as the title states, I get a random stabilitrac light at idle and very low rpms after the cam and longtube install. I have the misfire test turned off. there is no check engine light. has anyone run into this?
I have seen stabilitrak codes come up when the obd2 harness has been messed with or if it had factory trailer hitch package and the harness under the dash has been pulled. Not with just headers and cam unless someone unplugged a harness
I believe I found the culprit. I had to tweak the misfire tables. even though it wasn't throwing a misfire code, it was still affecting the stabilitrak