Results 1 to 5 of 5

Thread: MVPI2 pro locking up during scan and not reading or connecting periodically

  1. #1
    Tuner in Training
    Join Date
    Dec 2018
    Posts
    10

    MVPI2 pro locking up during scan and not reading or connecting periodically

    Was working great then hung up during a read. NOw it will scan for a few minutes and then drops the scan and appears disconnected No interface found error. Verified OBD2 interface good with aeroforce gauges.

    Any thoughts? Is ther a hard reboot on the device? Or is this just a wait for replacement?

  2. #2
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    2
    Same herr -interface cannot be found
    it gets recognized in USB ports but even sync cannot detect??

  3. #3
    Senior Tuner
    Join Date
    Dec 2008
    Location
    on the Dyno
    Posts
    1,727
    I've been getting a ton of issues with the MPVI2 cable as well. Took about 20 tries last night to flash a TCM in a 2019 ZR1. Application kept crashing in the process.
    James Short - James@ShorTuning.com
    Located in Central Kentucky
    ShorTuning


  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,082
    Quote Originally Posted by LSxpwrdZ View Post
    I've been getting a ton of issues with the MPVI2 cable as well. Took about 20 tries last night to flash a TCM in a 2019 ZR1. Application kept crashing in the process.
    James I would recommend opening a support ticket if you are having issues.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Senior Tuner
    Join Date
    Dec 2008
    Location
    on the Dyno
    Posts
    1,727
    Quote Originally Posted by Bill@HPTuners View Post
    James I would recommend opening a support ticket if you are having issues.
    Will do.
    James Short - James@ShorTuning.com
    Located in Central Kentucky
    ShorTuning