Results 1 to 3 of 3

Thread: Wastegate Setting For External Wastegate

  1. #1

    Wastegate Setting For External Wastegate

    What should I set the wastegate settings to in order to bypass it? I have an aftermarket turbo with a turbosmart external wastegate. 2004.5 ctd. I have the fooler plugged into the solenoid harness, but I would like to set this in HP tuners correctly.
    2004.5 Cummins.
    Borgwarner 13009097047 s300sxe 63-73 compressor 63/80 super core turbine housing 80mm .83 A/R Twin Scroll Housing,
    50HP BMS/Exergy Injectors
    BD T4 manifold,
    BD CAI,
    5" turbo back exhaust,
    turbosmart ext wastegate,
    BD lift pump with 2 mic filter and h2o separator,
    banks intercooler, Banks intake horn,
    slightly built tranny.......

  2. #2
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    Shouldn?t need to do anything as you are no longer using the electronic wastegate solenoid. You don?t have anything to drive electronically. Control over your turbo is solely on manual boost elbow or similar and fueling/timing.

  3. #3
    Ok. Thanks.