Results 1 to 3 of 3

Thread: 2013 Audi S6 - Validate Checksum Failed While trying to open supplied stock file.

  1. #1

    2013 Audi S6 - Validate Checksum Failed While trying to open supplied stock file.

    Message: Validate Checksum failed. You will be unable to save or flash this file. Controller: MED17.1.1 TC1797

    ID: 2044785157
    HardwareVersion: 1.4.0
    ManufactureDate: 8/20/2018 9:44:31 PM
    PartNumber: 6230
    FirmwareVersion: 2.0.120
    PoweredOnTime: 00:32:36
    VehicleConnectedTime: 00:32:36


    Protocol Info: ISO 15765-2, CAN, 500 kb/s

    ECM: 7E8, CAN, ECM -EngineControl - MED17.1.1 TC1797, VAG
    VIN: WAUJ2BFC1DN135814 - 2013 Audi S6 w/ Innovation Pkg., 4.0 L, 8 Cyl
    Serial: 13290664
    OS: 4G0906014B__0009
    Calibration IDs: 4G0014B 0009AVAK
    Calibration VNs: D0AAE84F
    Basic PIDs: 50
    Trouble Codes:
    Controller Type ID By OS: 50030
    Diagnostic Requirements: Init CAN 0x10 0x03
    Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, ISO 14229-1 Mode 0x22, CAN Listener

    TCM: 7E9, CAN, TCM -TransmisCtrl
    Calibration IDs: 4G1927156S 0011
    Calibration VNs: 0000A9C1
    Basic PIDs: 10
    Trouble Codes:
    Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, CAN Listener
    Attached Files Attached Files

  2. #2
    Received an email last night this issue will be corrected and released with the next software update.

  3. #3
    Email about new Beta version received today.

    I'm in!

    Wooo!!!

    Holy smokes these PCM's use a significantly different strategy than the LS based PCM's I am used to.