Download the beta right now and you will be very pleased. There are now base position, lock-pin, and intake/exhaust max lines. Also a small base table. I contacted support and this was their response. Hats off to them.
Up to 31 degrees wot on e68. Injector is almost maxed so this is where im at till i get bigger injectors. Permissible torque table tweak took away my odd limp mode while modifying the maf and inj multiplier.
It was shutting off because of misfires, but i was being a little aggressive with it. Returned it to the normal idle till I learn some more. Is there a concern of damage to the valvetrain also?
https://www.youtube.com/watch?v=Qs8M7ZQkjlE
Update: using the wot tables results in a throaty idle but still very smooth. The idles that chop good and rev good end up misfiring and shutting off.