GEN III 6.0 DBW Throttle way to sensitive

[rjhickling]

Hello all,

Can someone tell me if there is a place within HPT to adjust the throttle sensitivity? Its way to sensitive. I cant hold it at a steady RPM if my life depended on it. I have seen other posts where people are looking for more initial throttle response, I want less I believe.

2003 6.0 P59 pedal TAC module computer are all from the same donor.

Attached is my tune.

Thanks in advance.

[kthunt]

im no expert but i think your enrichment rate(ramp in) is too high. set it to 1 and start from there

[rjhickling]

Thank you for the response. I will take a look at the enrichment rate.

[IARLLC]

Under Engine>Airflow>Electronic Throttle>Desired Throttle Area both tables are doubled or more up until 41%. I would return these two tables to stock.

04 YD stock.hpt

There is a 2004 Yukon Denali 6.0 stock tune to use for reference.

[rjhickling]

Thank you very much for the help! I will take a look at this as well!

[kthunt]

any luck?