Hello all,
I am new to tuning as I have mentioned in another post. A little back ground... I changed out the CAM and lifters in my 2013 Suburban, put everything back together, correctly as far as I can figure. pulled the data from the vehicle and changed the DOD to off and turned off the DTC codes for the intake solenoids. My problem now is I am getting DTC codes for 3 of the ignition coils, B,D,F also getting P0106, P0300, P0443, and a P0507. I am at a loss as I don't know that much about tuning yet.
Any help would be greatly appreciated.