I change Driver Demand in the Spark Torque Ratio Table to 1.0.
I'm saying if you can get your torque/inverse tables calculated correctly. You can get rid of mapped points that are not really serving a purpose other than to randomly weigh <5%. You can get rid of certain tables and it have less useless adjustments. See the picture. I'd also change EVC on mapped point 7. to 10, 15 or 20 degrees
mappedpoints.JPG
Your IVO will see max retard of 30*. EVC will only see what highest value in your OP table. Mapped points with IVO greater than 30* are useless and the mapped points with EVC greater than 20* are useless and the time spent on calculating the torque tables and spark adjustments would be unnecessary since the angles are not scheduled to carry any weight. They will weigh out only for blending into OP. instead of blending between 12 MP, you could keep the weight between 6.