TCC Adapt Settings

[WS6FirebirdTA00]

I was looking at my TCC adapt settings and the max torque is set to 40 Nm and min 110 Nm, so it looks like it will never come on.

This is in my truck, 2018 Sierra, but I also see it in other tunes I have pulled. Just seems odd. Search didn't help me so I wanted to ask directly.

[Russ K]

I never touch those settings. I just set the desired TCC slip tables to 0.

Russ Kemp

[WS6FirebirdTA00]

I just find it odd the max torque is less than the min torque, basically disabling it.

Anyone else mess with this? Curious if it is really disabled from the factory, if there is a bug or if there is any benefit to enable.

[Jonblarc7]

I never touch those settings. I just set the desired TCC slip tables to 0.

Russ Kemp

Are your referring to the

TCC Desired Slip> AC Off 1st. Then make the whole table 0 or just the bottom three rows

HP TUNER.PNG

[DrLoch]

I would try all of them.