Got a 2016 Silverado I flash and now it wont start, with another scanner its telling me that the neutral shift its inactive.
What can I do??
Got a 2016 Silverado I flash and now it wont start, with another scanner its telling me that the neutral shift its inactive.
What can I do??
Re-do the write??
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
yea or hold the start button for a few seconds, i get 1 out of 5 flashes where it resets and you have to hold the button for start.
yes I have reflash it,
Should I keep re-do the write on just the Transmission?Originally Posted by 5FDP
Or I have to re-write ecm and tcm?
Well we end staying vary late yesterday and found the problem.
Truck did not want to start at all after re-writes so we reset it with the Acdelco TDS, Then I read the file and it was back to stock. So It was getting signal then we plug another scanner and it was telling us that the truck was in gear after the reset. We start checking the wires moving wires shaking them and it it move the signal to Park and Nuetral. Well the signal wire coming from the transmisi?n to the ecm didn’t have continuity wire was broke I don’t know how that happen
Reply With Quote