Page 4 of 4 FirstFirst 1234
Results 61 to 67 of 67

Thread: table rpm limit

  1. #61
    Quote Originally Posted by Jim P View Post
    Pilot is going to play a large role in the white smoke, cold enough ambient temperatures white smoke is unavoidable.
    Thanks. Ill work on rp and timing on main and pilot. I'll let you know how it goes. Thanks for the help.
    2004.5 Cummins. BW300sxe turbo, BD T4 manifold, BD CAI, 5" turbo back exhaust, turbosmart ext wastegate, BD lift pump with 2 mic filter and h2o separator, banks intercooler, Banks intake horn, slightly built tranny.......

  2. #62
    Advanced Tuner
    Join Date
    Jan 2018
    Posts
    258
    Pilot quantity will need to be worked on as well

  3. #63
    Potential Tuner
    Join Date
    Aug 2018
    Posts
    3
    Very helpful thread, thanks guys... but any update? Curious how it's going and if you've had time to drive it.

  4. #64
    I tried going both directions on rp, timing, etc. I just can't seem to Ditch the smoke. Im going to try enabling part throttle gov, lower torque fuel limit, and smoke limit next. Truck runs phenomenal, just smokes. Ill try and test this week and post back.

  5. #65
    Played around a bit today with only a little luck. Lowered my pw in idle and low rpm range and got rid of a fair bit of smoke there. Still not having much luck with the mid range cruising rpm range smoke. Tried lowering smoke limit with only a slight decrease in smoke if any. When i power brake i can smoke out the neighborhood

  6. #66
    Question, is there any danger to lowering injection pulse too much?
    2004.5 Cummins. BW300sxe turbo, BD T4 manifold, BD CAI, 5" turbo back exhaust, turbosmart ext wastegate, BD lift pump with 2 mic filter and h2o separator, banks intercooler, Banks intake horn, slightly built tranny.......

  7. #67
    No. Only thing that happens if you lower too much is maybe it will lope at idle or mightstart a bithard if you lower it in the wrong spot.
    06 SCLB. ATS stage 6, ATS Twin cp3, s369sxe, Fass 220, Hamilton 188/220, 110# springs, DDP 220's, ARP 425's, Big valve head, .40 over, 12v rods, balanced rotating assembly, Efi-Live etc.. 770hp 1380tq Tenacity Tuning