Results 1 to 6 of 6

Thread: 1999 gmt 400 fuel gauge problem

  1. #1
    Tuner in Training
    Join Date
    Apr 2018
    Location
    tucson az
    Posts
    11

    1999 gmt 400 fuel gauge problem

    i cannot get my fuel gauge to work.... its supposed to run through the 411 pcm i have a 2001 lm7 5.3 in it, i did the 4l80 swap segment swap worked to fix the trans issues, but i cannot get the fuel gauge to work.... can someone help?... thx

  2. #2
    Tuner in Training
    Join Date
    Jul 2018
    Posts
    37
    upload your tune ,,, see if it pwm or not

  3. #3
    Tuner in Training
    Join Date
    Apr 2018
    Location
    tucson az
    Posts
    11
    i changed somw stuff...i dont remember there the tab toi attech the file is
    Last edited by maddogwillie; 04-04-2019 at 04:19 PM.

  4. #4

  5. #5
    Tuner in Training
    Join Date
    Apr 2018
    Location
    tucson az
    Posts
    11
    the speedo is also messed up...it works on the scanner but not the dash,just like the tach...speedo acts like a tach....just goes up quickly and kinda stays there....just like its a tach

  6. #6
    Tuner in Training
    Join Date
    May 2017
    Posts
    20
    You've got your input and output speed sensor swapped for one
    second you need to adjust the fuel gauge based on an express van tune, here's my 98 tahoe with the modification already done.
    Attached Files Attached Files