Results 1 to 4 of 4

Thread: sts c6 1bar tune converting to 2bar

  1. #1

    sts c6 1bar tune converting to 2bar

    I have a 2006 C6 auto with a sts turbo. it was tuned in 2010 from someone else and has been running very good. ls2 engine is stock other than valve springs. I just started looking at the tune and other than being a 1 bar tune, it looks like the maf and pe were used to get the fuel where it needs to be. the VE was not touched. id like to run a 2 bar map and take advantage of boost enrichment and VE Boost.

    I started a 2 bar tune which attached below. any help is appreciated. id like to convert to 2bar and not mess the remaining parameters up.jc vette tune e30 timing 2bar (1).hptJC vette tune e30 1Bar save save save.hpt
    2002 Camaro SS, Twin S480s
    2006 Corvette C6, Twin Turbo
    1991 GMC Syclone, LS/AWD/AC

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,565
    You new file is tuner locked.

    Yeah, you could say it was hacked together on the PE. It's commanding an AFR of 9.0 LOL, jesus that is bad. That's the definition of raping the PE.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    it say is unlocked
    2002 Camaro SS, Twin S480s
    2006 Corvette C6, Twin Turbo
    1991 GMC Syclone, LS/AWD/AC

  4. #4
    Senior Tuner Lakegoat's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    1,459
    The 2 bar tune says "part of a remote tuning network you are not a part of" ?
    2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
    2013 Silverado 5.3, 6L80k 8.8