Results 1 to 3 of 3

Thread: 2019 Ford Edge St

  1. #1
    Tuner in Training
    Join Date
    Oct 2011
    Posts
    12

    2019 Ford Edge St

    I have a 2019 Ford Edge St that I am getting an error when trying to read the factory tune file. This is the error I am receiving.

    Reader upload request: 7f negative response code.

    I contacted support which was not to much help. They said this is caused by yhe vehicles battery being dead. That is not the case here. Still waiting on another response from support. I am using the MPVI2 with the latest software. Any help is appreciated. Thank you.

  2. #2
    Tuner in Training
    Join Date
    Apr 2018
    Posts
    29
    Probably too new of a vehicle, its not listed in the supported vehicles list. I get the same message on a 2018 Fiesta 1.6l Non turbo also not on the list...

  3. #3
    Potential Tuner
    Join Date
    Oct 2019
    Posts
    2
    Hi, brand new user to the forum, and to the tool & software. on the 2019 Edge ST is it possible to change wheel/tire size using this tool? Does it require credits? Are all wheel/tire sizes supported? and does it go by actual ###/##R## tire size or by overall diameter?
    Thanks!