ok so I have been trying to tune this set up for awhile now. Im in OLSD at this time with the intent of going CLSD I have a 5.3 76mm turbo 3 bar OS, decapped truck injectors(flowed 75lbs) small comp cam xr265hr. Base tune is from Matt at sloppy mech)
the problem inputs to VE have no effect on idle AFR. I lower injector plus width to .150 with no changes . the only thing that made a significant change was the transient fuel milligrams but the AFR would start out 16.0 ish with poor idle quality then just slowly work its way back to 11ish then settle in. I am new to tuning but have a good understanding of whats going on but this has me stumped , I have been losing sleep for a few weeks now.
This my first post on here I believe . I attached a copy of the tune and the scan. it shows up as numbers on my computer I hope it uploads.
I have a small hunch the pcm is bad or the OS is bunk.

Thanks and I look forward to any responses

3bar-help.hptidle3.hpl