Results 1 to 5 of 5

Thread: transition into WOT

  1. #1
    Potential Tuner
    Join Date
    Jun 2018
    Posts
    4

    transition into WOT

    okay so if i turn off fuel enrichment pedal by setting it to 0 percent. when will it use WOT lambda table?

  2. #2
    Senior Tuner CCS86's Avatar
    Join Date
    Nov 2017
    Location
    Austin
    Posts
    1,089
    Never.

  3. #3
    Advanced Tuner
    Join Date
    Feb 2017
    Location
    TX
    Posts
    761
    I've never set PE pedal threshold to 0. But factory calibration has PE pedal percent set to 89% meaning the throttle percent needs to be 89% to Power Enrich. Then setting to 50% means the throttle must be 50% to go into PE. Wouldnt 0% make PE active at the lightest throttle? And to disable PE, threshold would need to be set 105% or a high value?

  4. #4
    Senior Tuner CCS86's Avatar
    Join Date
    Nov 2017
    Location
    Austin
    Posts
    1,089
    Quote Originally Posted by Thatwhite5.0 View Post
    I've never set PE pedal threshold to 0. But factory calibration has PE pedal percent set to 89% meaning the throttle percent needs to be 89% to Power Enrich. Then setting to 50% means the throttle must be 50% to go into PE. Wouldnt 0% make PE active at the lightest throttle? And to disable PE, threshold would need to be set 105% or a high value?


    That's definitely possible. The PCM would either see it as always in PE mode when you are touching the pedal, or see it as a disable.

    My real question is why?

  5. #5
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    log fuel source
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161