Results 1 to 5 of 5

Thread: transition into WOT

  1. #1
    Potential Tuner
    Join Date
    Jun 2018
    Posts
    2

    transition into WOT

    okay so if i turn off fuel enrichment pedal by setting it to 0 percent. when will it use WOT lambda table?

  2. #2
    Advanced Tuner CCS86's Avatar
    Join Date
    Nov 2017
    Location
    Austin
    Posts
    585
    Never.

  3. #3
    Advanced Tuner
    Join Date
    Feb 2017
    Location
    TX
    Posts
    317
    I've never set PE pedal threshold to 0. But factory calibration has PE pedal percent set to 89% meaning the throttle percent needs to be 89% to Power Enrich. Then setting to 50% means the throttle must be 50% to go into PE. Wouldnt 0% make PE active at the lightest throttle? And to disable PE, threshold would need to be set 105% or a high value?

  4. #4
    Advanced Tuner CCS86's Avatar
    Join Date
    Nov 2017
    Location
    Austin
    Posts
    585
    Quote Originally Posted by Thatwhite5.0 View Post
    I've never set PE pedal threshold to 0. But factory calibration has PE pedal percent set to 89% meaning the throttle percent needs to be 89% to Power Enrich. Then setting to 50% means the throttle must be 50% to go into PE. Wouldnt 0% make PE active at the lightest throttle? And to disable PE, threshold would need to be set 105% or a high value?


    That's definitely possible. The PCM would either see it as always in PE mode when you are touching the pedal, or see it as a disable.

    My real question is why?

  5. #5
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    Jeddah, Saudi Arabia
    Posts
    1,997
    log fuel source
    E-tuning/remote Tuning Sultan@mastuning.net Follow @MASTUNING Contact/Whatsapp +966555366161
    [URL="http://www.mastuningsaudi.com"]