Originally Posted by
bbrooks98
I've lowered it(.60) to go a long with my lowered OP load point (.65). Theory being that it will stay in OP once it goes above the set load and won't return till it goes below the Hysteresis load point.
I know the Bend has a predefined max of 1 which all the cals seem to come with, but I'm curious if it will take a larger number if forced. My cars apart currently so I can't test it. With the traction control shift speed it had a predefined limit of 128 which I used to hit on the dyno, through a recent hptuners update it can now be bumped up to 200mph. So sometimes I think that predefined limit stuff is just on hptuners end and doesn't always mean that's all it will take.