Log Boost

[Metraman]

I'm feeling pretty stupid I can't figure how to log boost PSI. I've logged everything that says manifold nothing shows PSI.
Thanks

[orrwhat]

I'm feeling pretty stupid I can't figure how to log boost PSI. I've logged everything that says manifold nothing shows PSI.
Thanks

https://www.youtube.com/watch?v=X5k_QeWq2jk&t=557s

This is what is used to figure it out.

[Metraman]

https://www.youtube.com/watch?v=X5k_QeWq2jk&t=557s

This is what is used to figure it out.

I got it to work Thanks now how do you get it to show in the channels?

[Homer]

Boost is a math that is MAP - Baro...so I don't think you can add it to the channel as it is derived from 2 parameters already being sampled.

https://forum.hptuners.com/showthrea...l=1#post461980

[curt@injected]

Boost is a math that is MAP - Baro...so I don't think you can add it to the channel as it is derived from 2 parameters already being sampled.

https://forum.hptuners.com/showthrea...l=1#post461980

You can create a user-defined math. I think they already have one in there for boost actually.

[Homer]

You can create a user-defined math. I think they already have one in there for boost actually.

Yes, for graphs and charts but OP is asking if you can add it as a parameter in the channels. If you know how to do this, please share.

[Metraman]

Maybe the HP guys could help the Chrysler guys out and add the option to our channels

[CannaGeneticsBank]

Mine by default has showed boost in psi since i installed the software. I will look up what the channel ia called

[CannaGeneticsBank]

Mine is Intake Manifold Absolute Pressure SAE