I have a extra p01 from a 98 Chevy blazer and would like to flash it for a 5.3.would I just wright entire or just celebrate?
I have a extra p01 from a 98 Chevy blazer and would like to flash it for a 5.3.would I just wright entire or just celebrate?
1998-1999 blazer computers are GM Vortec "computers".
You need to view the calibration details page to verify if it's really a P01 computer or not. You will brick the computer or it just won't work if you flash a P01 file into a Vortec computer.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
i was wrong its a 2002 blazer 4.3 p01 pcm
Okay, then you need to write entire with a V8 file over that.
Just know doing it with HP Tuners will burn up several credits. It may be cheaper to flash the computer with a dealership tool to a V8 file and then just license it once.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
what if im flashing with a file from a 5.3 pcm i all ready have licenced?
Still going to cost you credits.
You have to license that 4.3 computer. So 2 credits. Then you write entire your already license 5.3 file to it. Now you just created a whole new file on a different computer and you will have to license that file. Now it's 4 credits.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote