Does anyone know how to increase the Peak Engine Torque limitation on the E92A ECMs above the 879 foot-pounds threshold? No matter how I set up the Peak Engine Torque table, I still get a flatline of 879 foot-pounds. Is there some other cap I am missing somewhere?
Thanks in advance!
HP Tuners Forum Post 1.png
HP Tuners Forum Post 2.png
2022 Cadillac CT5-V Blackwing (733 whp)
2022 Cadillac CT4-V Blackwing (716 whp), 10.750 @ 134.77 mph
2016 Cadillac ATS-Vs (eleven ATS-Vs in the 9s)
2008 Pontiac G8 (first G8 in the 10s), 10.727 @ 129.87 mph
2000 Bonneville SSEi (first 3800 Bonneville in the 10s), 10.711 @ 125.71 mph
1999 Grand Prix GT (first 3800 FWD in the 8s), 8.902 @ 154.90 mph
1998 Firebird (first 3800 RWD in the 8s), 843 whp, 8.991 @ 152.12 mph
1998 Grand Prix GTP (first 3800 FWD in the 10s), 9.499 @ 145.13 mph
That’s just the limit of the scanner PID much like 655 g/sec on MAF
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
Wasn't aware of that. But it makes total sense, since the ECM didn't seem to be attempting to scale things back.Originally Posted by Ben Charles
Appreciate the information!
Reply With Quote