Results 1 to 5 of 5

Thread: 2011 Traverse 3.6 questions

  1. #1
    Tuner in Training
    Join Date
    Nov 2016
    Posts
    39

    2011 Traverse 3.6 questions

    I have the MPVI2, Just installed a new throttle body on a 2011 traverse 3.6 litre. Will the VCM or scanner give me the ability to put the vehicle in "idle relearn" mode?

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    If its a feature that is available it would be in the scanners vcm controls section, check it out, if its there and clickable it means its available.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Nov 2016
    Posts
    39
    special functions tab?
    Not there.
    Crap

  4. #4
    Tuner in Training
    Join Date
    Nov 2016
    Posts
    39
    Quote Originally Posted by Bill@HPTuners View Post
    If its a feature that is available it would be in the scanners vcm controls section, check it out, if its there and clickable it means its available.
    Bill, Do I need to have the vehicle licensed to interface to do this? or is it in the "free software" Thanks.

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    You do not need to license a vehicle in order to use the scanner.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"